Hi All,
After speaking with Andrew Macklin I can confirm you have an extension until Monday 25th of November.
Cheers, and good luck for the final push!
Wednesday, November 20, 2013
Wednesday, November 13, 2013
Laser Cutter update
Hi All,
By now you've probably heard the laser cutter in room 2025 is out of action.
It appears that the number 2 mirror (on the left hand side of the machine) wasn't pushed all the way in and when the laser hit the side of it the coating was destroyed, then the housing was demagnetized resulting in the stray beam melting the y-axis drive belt.
The end result is we have a $850 repair bill.
It's going to be fixed on Friday morning ... so you'll get access again after that.
I'm going to speak to Andrew Macklin regarding a further extension so you can finish off well.
Please take extra care when replacing the mirrors after you've inspected/cleaned them; if you are at all unsure do not proceed ... contact me or Hank Haeusler.
Finally, as a reminder, always ensure the extraction unit is on before cutting.
Cheers
By now you've probably heard the laser cutter in room 2025 is out of action.
It appears that the number 2 mirror (on the left hand side of the machine) wasn't pushed all the way in and when the laser hit the side of it the coating was destroyed, then the housing was demagnetized resulting in the stray beam melting the y-axis drive belt.
The end result is we have a $850 repair bill.
It's going to be fixed on Friday morning ... so you'll get access again after that.
I'm going to speak to Andrew Macklin regarding a further extension so you can finish off well.
Please take extra care when replacing the mirrors after you've inspected/cleaned them; if you are at all unsure do not proceed ... contact me or Hank Haeusler.
Finally, as a reminder, always ensure the extraction unit is on before cutting.
Cheers
Friday, November 1, 2013
Laser cutter update
Hi All,
You'll be happy to know the laser cutter is working exactly as expected. Today students were cutting plywood and acrylic with no trouble at all. There was a lot of rastering going on too ... with some nice results.
The problem seemed to be that it was out of alignment ... going through a full alignment setup got it back to factory specs. My guess is this happened when I shifted the gantry with the machine being switched on.
Another thing to note is that the lens has a fracture in it (the technician showed me this last time he was here). This means that it has gotten dirty and the laser has heated up the glass lens rather than passing through it. They are about $500 to replace. With its current performance being ok we'll keep going with it as it is. But please remember to check the lenses and mirror every time to ensure they aren't dirty ... and if they are, please clean them before use (you will need to wait until they cool down if the machine has been in use ... say 5 minutes after use ... before you apply the cold fluid or this may crack the lens too).
Cheers, have a good weekend!
You'll be happy to know the laser cutter is working exactly as expected. Today students were cutting plywood and acrylic with no trouble at all. There was a lot of rastering going on too ... with some nice results.
The problem seemed to be that it was out of alignment ... going through a full alignment setup got it back to factory specs. My guess is this happened when I shifted the gantry with the machine being switched on.
Another thing to note is that the lens has a fracture in it (the technician showed me this last time he was here). This means that it has gotten dirty and the laser has heated up the glass lens rather than passing through it. They are about $500 to replace. With its current performance being ok we'll keep going with it as it is. But please remember to check the lenses and mirror every time to ensure they aren't dirty ... and if they are, please clean them before use (you will need to wait until they cool down if the machine has been in use ... say 5 minutes after use ... before you apply the cold fluid or this may crack the lens too).
Cheers, have a good weekend!
Extension for Assignment 3
Hi Guys,
Flowing on from the setbacks earlier in the semester some of you have requested an extension for assignment 3. this seems perfectly reasonable to me, so your new date for submission is Monday 18th of November.
Cheers
Flowing on from the setbacks earlier in the semester some of you have requested an extension for assignment 3. this seems perfectly reasonable to me, so your new date for submission is Monday 18th of November.
Cheers
Sunday, October 27, 2013
Grasshopper link
Hi Guys,
Following today's tutorial here is a link to a great set of Grasshopper tutorials:
http://elsewarecollective.com/AIR/Tutorial%20Videos/AIR_TutorialVideoList.pdf
I've gone through a bunch of these myself and found them to be really clear and inspirational.
Cheers
Following today's tutorial here is a link to a great set of Grasshopper tutorials:
http://elsewarecollective.com/AIR/Tutorial%20Videos/AIR_TutorialVideoList.pdf
I've gone through a bunch of these myself and found them to be really clear and inspirational.
Cheers
Sunday, October 20, 2013
On Lazyness, Recycling, Sculptural Mathematics and Ingenuity
Hi Guys,
This title, by architects Neutelings and Riedijk, is on level 9 of the Main Library:
Title: El Corquis de Arquitectura.
Subjects: Architecture -- Spain -- Periodicals ; Architecture -- Periodicals
Description: Spanish and English, <1989->
Description based on: 19 (enero 1985); title from cover.
Publisher: Madrid, Spain : El Croquis,.
Date: 1982
Format: v. : ill. ; 33 cm.
Language: Spanish;English
Identifier: ISSN0212-5633;ISSN0212-5633
ILS API ID: NSW01000844777
Source: UNSW Aleph
Call number: 720.5/121 issue 94
I'll pop up this afternoon and scan the appropriate pages.
Cheers
This title, by architects Neutelings and Riedijk, is on level 9 of the Main Library:
Title: El Corquis de Arquitectura.
Subjects: Architecture -- Spain -- Periodicals ; Architecture -- Periodicals
Description: Spanish and English, <1989->
Description based on: 19 (enero 1985); title from cover.
Publisher: Madrid, Spain : El Croquis,.
Date: 1982
Format: v. : ill. ; 33 cm.
Language: Spanish;English
Identifier: ISSN0212-5633;ISSN0212-5633
ILS API ID: NSW01000844777
Source: UNSW Aleph
Call number: 720.5/121 issue 94
I'll pop up this afternoon and scan the appropriate pages.
Cheers
CNC Router Details
Hi Guys,
The CNC router at the Square House is a Roland MDX-550 and it uses a piece of software called the SRP Player.
SRP stands for Subtractive Rapid Prototyping.
There are videos tutorials online; this is one uploaded by the makers of the machine, Roland, http://www.youtube.com/watch?v=IwNbWbyWcL4
We can visit to take a look at the machine at 1pm today (Monday 21 October).
Cheers
The CNC router at the Square House is a Roland MDX-550 and it uses a piece of software called the SRP Player.
SRP stands for Subtractive Rapid Prototyping.
There are videos tutorials online; this is one uploaded by the makers of the machine, Roland, http://www.youtube.com/watch?v=IwNbWbyWcL4
We can visit to take a look at the machine at 1pm today (Monday 21 October).
Cheers
Thursday, October 17, 2013
More examples
Hi Guys,
This is from one of the sites we looked at in class the other day: Le Container
A nice example of site and architecture coming together in a model.
and some other examples (just one with a site, but just to keep you thinking/inspired):
This is from one of the sites we looked at in class the other day: Le Container
A nice example of site and architecture coming together in a model.
and some other examples (just one with a site, but just to keep you thinking/inspired):
Tuesday, October 15, 2013
Filament for the 3d Printers
Hi Guys,
You can get your own filament for the 3d printers here:
https://www.bilbycnc.com.au/DispCat.asp?CatID=9&SubCatID=107
Its very reasonably priced and you can get a range of colours ... you might like to team up and share some different colours between a group of you?
Cheers
You can get your own filament for the 3d printers here:
https://www.bilbycnc.com.au/DispCat.asp?CatID=9&SubCatID=107
Its very reasonably priced and you can get a range of colours ... you might like to team up and share some different colours between a group of you?
Cheers
Sunday, October 13, 2013
Websites and Blogs from today's class
Hi Guys,
Choi sent me all of the blog's we viewed in today's class; I've put them in a new post so that they are a little easier to get to;
http://lecontainer.blogspot.com.au/
http://bldgblog.blogspot.com.au/
http://www.dezeen.com/
http://abduzeedo.com/
http://www.deathbyarchitecture.com
http://www.archdaily.com/
http://www.ted.com/
I encourage you all to visit them on a regular basis.
Cheers
Choi sent me all of the blog's we viewed in today's class; I've put them in a new post so that they are a little easier to get to;
http://lecontainer.blogspot.com.au/
http://bldgblog.blogspot.com.au/
http://www.dezeen.com/
http://abduzeedo.com/
http://www.deathbyarchitecture.com
http://www.archdaily.com/
http://www.ted.com/
I encourage you all to visit them on a regular basis.
Cheers
Wednesday, October 9, 2013
Laser cutting advice from Anthony Jones
Hi All,
Below is some advice from Anthony Jones (Design Lab) regarding problems you might be having with the new VLS3.50 laser cutter;
I would add that slowing the speed of the laser seems to have the greatest effect on cutting through the material, but be especially careful to ensure that any flames from the cut are sucked away quickly by the extraction unit ... we don't want those flames getting anywhere near the lenses and mirrors!
I've had reports back that 5mm MDF has been cut successfully, so its all in the settings.
Finally, I'll remind you that upping the material thickness beyond what the material actually is simply puts the laser out of focus and lowers its cutting performance, which upping the risk of fire, so don't be tempted to use that technique if your material isn't cutting.
Cheers
Below is some advice from Anthony Jones (Design Lab) regarding problems you might be having with the new VLS3.50 laser cutter;
·
Laptops are not connecting properly to the laser:
o The
connection problems could be due to:
-
not logged in to PC as ‘admin’ with full rights
-
incorrect model chosen during install
-
UCP installed, but actual ‘driver’ firmware not
being installed when laser connected (found new hardware wizard)
-
Won’t work with Mac, and Windows 8 may have ‘driver
not digitally signed’ errors
-
faulty or low-powered USB port
·
Material
is not being cut 100% of the way through:
o
Most
materials do vary a bit from their nominated thickness – solution is to
increase the power settings as follows:
-
in
the ULS driver, on the ‘Materials Database tab’, drag the intensity slider for
‘Vector Cutting’ till you get a result
that works.
I would add that slowing the speed of the laser seems to have the greatest effect on cutting through the material, but be especially careful to ensure that any flames from the cut are sucked away quickly by the extraction unit ... we don't want those flames getting anywhere near the lenses and mirrors!
I've had reports back that 5mm MDF has been cut successfully, so its all in the settings.
Finally, I'll remind you that upping the material thickness beyond what the material actually is simply puts the laser out of focus and lowers its cutting performance, which upping the risk of fire, so don't be tempted to use that technique if your material isn't cutting.
Cheers
Wednesday, October 2, 2013
Safe Working Procedure form to read
hi All,
Please download and read this form regarding the safe working procedure for using the VLS3.50 desktop laser cutter in room 2025:
HS026_Safe_Work_Procedure_Form_VLS350_RL.pdf
It goes over all of the items we covered in your training.
I'll have you sign my master copy next time I see you.
Cheers
Please download and read this form regarding the safe working procedure for using the VLS3.50 desktop laser cutter in room 2025:
HS026_Safe_Work_Procedure_Form_VLS350_RL.pdf
It goes over all of the items we covered in your training.
I'll have you sign my master copy next time I see you.
Cheers
Tuesday, September 17, 2013
Sunday, September 15, 2013
CREATE: UNSW Club for Making Things
Hi All,
Hopefully by now you've seen the posters ...
The Create club at UNSW is offering tutorials on using the Arduino; a good way to take your models to the next level with lighting and interactivity.
I'd encourage you to get involved.
Cheers
Hopefully by now you've seen the posters ...
The Create club at UNSW is offering tutorials on using the Arduino; a good way to take your models to the next level with lighting and interactivity.
I'd encourage you to get involved.
Cheers
Monday, September 9, 2013
Swipe Card Access Live
Hi Guys,
Your swipe cards should now give you access to our mini fab lab; They should work on the glass door at the top of the ramp on level 2.
Cheers
Your swipe cards should now give you access to our mini fab lab; They should work on the glass door at the top of the ramp on level 2.
Cheers
Sunday, September 8, 2013
Examples of Objects in Cases
Hi Guys,
Here are a few examples:
Here are a few examples:
Jeff Koons: Multiple Levels
Jeff Koons: Open Base
Marc Quinn: Refrigerated Case
Conventional Presentation Case in Museum
Damien Hirst: Case Mounted on a Wall
Damien Hirst: Shark in a Case filled with Formaldehyde.
Architectural Model of Japanese House in Glass Case
Anthony Gormley: Artists Body Encased
Anthony Gormley: Artists Body Encased ... From Projected Normals
Anthony Gormley: As Above but without the Bronze Skin
Christo and Jeanne-Claude: Wrapping
Christo and Jeanne-Claude: Wrapping Trees
Encased iPod: 3d Printing?
Rachel Whiteread: Casting
Rachel Whiteread: Casting House
EXAM in rm2034 Today
Hi All,
See you in rm2034 today for the Design Exam for assignment 2.
The exam starts at 9am and runs through the whole session ... however, at some point I'll take groups to be inducted on the new desktop laser cutter.
Cheers
See you in rm2034 today for the Design Exam for assignment 2.
The exam starts at 9am and runs through the whole session ... however, at some point I'll take groups to be inducted on the new desktop laser cutter.
Cheers
Laser Cutter Driver
Hi Guys,
Download this file to drive the laser cutter from your computer.
When installing, the type of laser is a VLS3.50
Cheers
Download this file to drive the laser cutter from your computer.
When installing, the type of laser is a VLS3.50
Cheers
Wednesday, September 4, 2013
Laser Cutter has Arrived
Hi All,
I'll do the additional induction with you all on Monday, there are a few differences between this machine and the ones in the Design Lab; so don't use it until you've been inducted and I've given you the all clear.
Feel free to drop by and check it out though...
Cheers
I'll do the additional induction with you all on Monday, there are a few differences between this machine and the ones in the Design Lab; so don't use it until you've been inducted and I've given you the all clear.
Feel free to drop by and check it out though...
Cheers
Subscribe to:
Posts (Atom)











